1/2 inch torque wrench
Torque wrench push-through square drive
TRQWRNCH-PSHTHRG-1/2IN-(60-300NM)
Register now and access more than 20,000 products
- Accuracy of ± 3 % to the set value
- Simple and precise adjustment by turning the handle
- Switchover and/or push-through square drive
- Scaling in both newton metres (Nm) and pound-force feet (lbf·ft)
- Audible and tangible perception of torque triggering prevents over-tightening of bolts
- Anti-slip 2-component handle
- With calibration certificate
Torque wrenches are precision tools that must be checked at regular intervals with suitable measuring equipment and adjusted if necessary. We recommend annual calibration by our Master Service.
Datasheets(X)
After use, relax spring and set to lowest value.
 | |
Tip size | 1/2 inch |
Min./max. torque measuring range | 60-300 Nm |
Min./max. torque measuring range (inches) | 45-220 lbf.ft |
Suitable for right-hand tightening | Yes |
Suitable for left-hand tightening | Yes |
Scale value torque | 5 Nm |
ISO | DIN EN ISO 6789-1:2017 |
Length (L1) | 570 mm |
Length of lever (L2) | 550 mm |
Ratchet head height (B1) | 22 mm |
Ratchet head height with square (B2) | 45 mm |
Handle diameter (D1) | 37 mm |
Last viewed
High-performance fastening base for wide-strip cable ties
Twist Drill bits HSS ASME B94.11M TYPE RN
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Screw-on fastening base
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Twist drill bit HSS DIN 338 TYPE RN
Single wire seal (SEAL) For uninsulated cable connector
Folding rule made of birch wood
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)