ASSY<SUP>®</SUP> 3.0 zinc-plated blue chipboard screw - SCR-PANHD-WO-AW20-(A3K)-4,5X30/27,0

ASSY<SUP>®</SUP> 3.0 zinc-plated blue chipboard screw - SCR-PANHD-WO-AW20-(A3K)-4,5X30/27,0 - 1

ASSY<SUP>®</SUP> 3.0 zinc-plated blue chipboard screw - SCR-PANHD-WO-AW20-(A3K)-4,5X30/27,0 - 2

ASSY^® 3.0 zinc-plated blue chipboard screw

Name: ASSY ® 3.0 zinc-plated blue chipboard screw
Brand: Würth
SKU: 0153045030

ASSY 3.0 steel zinc plated full thread pan head AW
SCR-PANHD-WO-AW20-(A3K)-4,5X30/27,0
ASSY 3.0

Art.-no. 0153045030

EAN 4047376868052

All versions

Specification

Specially developed screw for securing the cup connector in the KALTSCHMELZ^® anchor for the screw mount.

Connects the wood instead of splitting it

Asymmetric thread – faster speed

Low screw-in torque

High over-turning force

Faster screwing in than conventional chipboard screws

Single-flight thread

AW drive – more power

Optimum transmission of forces

Very good snug fit

Fast location

Screw locates securely

Almost no unscrewing of the bit

No wobbling

No damage to surface coating of screw

Only 5 bit sizes for the diameters 3.0 to 12.0 mm

Ring thread – less tendency of the wood to split, very few blow-outs

Minimal splitting forces, especially when screwing in at edges

Reduction of the screw-in torque

Blow-outs are avoided to a high degree thanks to the punching effect of the ring thread

Notice

The screws are not suitable for outdoor use and for rooms subject to short-term or continuous high moisture levels! Please use ASSY® 3.0 A2 stainless steel screws in these cases.

ASSY 3.0 chipboard screws are optimised for use in wooden materials. When used in plastic anchors, a reduction of the load-bearing capacity is possible. Therefore, we recommend only using screws without optimised thread tips (drill tip, mating thread, ring thread, serrated edge, self-clearing groove, etc.) in plastic dowels, e.g. Würth ASSY D, prefix number 0151 (countersunk head) and prefix number 0153 (pan head).

To attach metals to wood, machine a precise cutout in the metal tab.

Available work documents:

Timber dimensioning software, load tables and detailed processing instructions can be found on the service page: www.wuerth.de/assy.

When using these screws, please follow ETA-11/0190 specifications.

Application

Application area

Securing thin sheet metal onto wood in shopfitting, interior fitting and furniture construction.

Instructions

Screw-in angle 0° to 90°. For coniferous wood or wood-based materials made from softwood, the screw connection is made without pre-drilling. To reduce the edge distances, a pre-drilled hole can be made according to the core diameter. When screwing into hardwood, pre-drill according to ETA-11/0190.

Technical information


Nominal diameter (d)	4.5 mm
Length (l)	30 mm
Head type	Pan head
Head diameter (d_h)	9 mm
Head height (k)	3 mm
Internal drive	AW20
Thread type	Wood screw thread
Thread design	Full thread
Thread form	Single start thread
Thread length (lg)	27 mm
Core diameter	2.7 mm
Shape of tip	Tip with ring thread
Angle of the tip	20 Degree
Material	Hardened steel
Surface	Zinc plated
Colour	Silver
Max. screw-in angle	90 Degree
Min. screw-in angle	0 Degree
Product weight (per item)	2.650 g
Suitable for use in the following materials	Board ply wood (BSP), Wood, Derived timber product, Hardwood, LVL, Softwood
Area of application	Universal, Furniture, Metal plate, wood, Fitting
Approval	ETA-11/0190
RoHS-compliant	Yes