Adhesive boundary tape
Contour-following adhesive tape
MASKTPE-HEATRES-RED-W6MM
Register now and access more than 20,000 products
Extremely flexible
Ideally suited for masking tasks around curves.
Extremely thin backing material
A particularly thin painting edge can be produced.
Good adhesion
- Suitable for masking work on all smooth surfaces found in the construction and automotive sectors. The tape can be removed again immediately after painting and leaves no residues
- Suitable for bonding on all crepe adhesive tapes in the range in order to produce a fine painting edge.
Resistant to moisture and solvents
The adhesive tape is suitable for painting work involving all commercially available aqueous varnish and paint systems that contain solvents.
The adhesive boundary tape is not suitable for oven drying!
To ensure residue-free removal, the tape must be removed immediately after the paint or varnish has dried.
The adhesive tape is not UV-resistant and is therefore not suitable for outdoor applications.
The above application instructions are recommendations given on the basis of our own tests and experience. We recommend that you carry out your own tests before use. Due to the great variety of different applications and storage and processing conditions, we cannot guarantee a particular application result. We will not accept legal liability for any advice or technical information provided by our free customer hotline unless this advisory service and/or technical information is part of the contractually agreed performance owed by us, or the customer service employee acted willfully or intentionally. We guarantee the consistent quality of our products and reserve the right to make technical changes and improvements.
Datasheets(X)
- Used to mask masking tapes to produce a clean painting edge
- Sharp-edged masking on smooth surfaces, e.g. decorative filling techniques in painting applications
- Marking in various areas, e.g. pipework
- Sealing cases, boxes and cans
- Multiple adhesive sealing of small bags
Backing material | PVC |
Adhesive base | Natural rubber |
Colour | Red (base material) |
Width | 6 mm |
Length | 66 m |
Thickness | 0.07 mm |
Dynamic peel strength at 25 mm | 9 N |
Elongation at break | 60 % |
Min./max. temperature resistance | -30 to 70 °C |
Min./max. processing temperature | 10 to 25 °C |
Ultraviolet resistance | No |
Moisture resistance | Yes |
Shelf life from production/conditions | 24 Month / at 20°C and 50% humidity |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Point chisel Plus Longlife & Speed
JIS B1111 steel 4T zinc plated H
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Japanese saw blade For use in 25 mm cutter knife
Cylindrical pin, hardened ISO 8734 steel plain, type A hardened, tolerance class m6
Hexagonal bolt with thread up to the head
Twist drill bit HSS DIN 338 TYPE RN
WÜPLAST® pan head screw with flange and hexagon socket WN 1451, steel 10.9, zinc-plated, transparent passivated (A3K)
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain