Apparatus castor with rotating holder and locking brake
Swivel machinery castor with locking device
SWIVMACSTR-LOK-SCRONPLT-D100-80KG
Register now and access more than 20,000 products
- Friction bearing hub
- Does not damage flooring
- Strength: 83±5 Shore A
- Rim comprises two sheet steel discs, riveted and electrogalvanised
- Low noise
- Low roll resistance
- Application temperature: -20°C to +60°C
- Housing made of electrolytically galvanised sheet steel
- Double ball collar with grease lubrication
- Dust protection ring
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
For damp environments. Resistant to diluted acids. Not resistant to organic solvents and oils. These castors are used e.g. for workshop and assembly trolleys, load rollers, service trolleys, roller boards and waste containers.
 | |
Roll diameter (D) | 100 mm |
Load capacity | 80 kg |
Height (H) | 128 mm |
Roll width (L) | 30 mm |
Bolt hole depth (R) | 35 mm |
Hole distance (a) | 80 mm |
Hole distance 2 (b) | 60 mm |
Elongated hole width (c) | 9 mm |
Min. temperature conditions | -20 °C |
Max. temperature conditions | 60 °C |
Last viewed
Square wedge-shaped washer DIN 6917, 295-350 HV, hot-dip galvanised, wedge-shaped, for high-tensile prestressed bolt on I-profile
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Plastic expanding rivet without cap, with multiple slits
Cylindrical pin, hardened ISO 8734 steel plain, type A hardened, tolerance class m6
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
Cable ties with metal latch closure – industrial quality
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Cable ties with metal latch closure, heat-stabilised and weather-resistant – industrial quality
Cylindrical pin, hardened ISO 8734 steel plain, type A hardened, tolerance class m6
All-rounder injectable mortar WIT-VM 250