Blade terminal for repair wire MCP
Repair wire flat plug contact AMP MCP
REPWRE-FLPLGCNCT-(SN)-MCP2,8-1,0SMM-L200
Register now and access more than 20,000 products
No crimping tool required
Reduces costs
Correct crimping
Maximum safety
Offset wire ends
No stripping required
Includes individual wire seals
- Can be used with both sealed and unsealed housings
- Slide the cable terminal onto the end of the wire offset by 180°
Check if this type of installation is approved by the respective vehicle manufacturer.
- Slide the cable terminal into the housing
Check if this type of installation is approved by the respective vehicle manufacturer.
Datasheets(X)
For the following vehicle manufacturers: BMW, Mercedes-Benz, Opel, VAG and others
Wire cross section | 1 mm² |
Nominal size of flat plug/push connector/blade connector | 2.8 x 0.8 mm |
Power-lead length | 200 mm |
Colour | Yellow |
Number of locking lugs | 2 PCS |
Corresponds to original spare part number | VW 000 979 026 |
Surface | Tin plated |
Last viewed
Raised countersunk tapping screw, shape C with Z recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), PZ drive, round head, shape C
Square wedge-shaped washer DIN 435, zinc-plated steel, for I-section
Pan Head screw with hexalobular head ISO 14583, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Sealing ring, copper, shape A
Cable tie BT PA
Pan Head screw with hexalobular head ISO 14583, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Scanner system
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain