Blind rivet, closed, with break mandrel and countersunk head ISO 15974, sleeve: aluminium, mandrel: steel
ISO 15974 countersunk head aluminium/steel
RIV-ISO15974-ALU/ST-(5,5-8,0)-3,2X12,5
Register now and access more than 20,000 products
The dimensions and tolerances defined in EN ISO 15974 must be observed.
Tensile and shear forces in accordance with ISO 15974
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 3.2 mm |
Length (l1) | 12.5 mm |
Head diameter (dk) | 6.7 mm |
Head height (k1) | 1.3 mm |
Material of sleeve | Aluminium |
Material of mandrel | Steel |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Min./max. grip range | 5.5-8.0 mm |
Drill hole diameter | 3.3 mm |
Shear-fracture load | 1100 N |
Tensile fracture load | 1450 N |
Head type | Countersunk head 120 degree |
Last viewed
Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
CERALINE vulcanised fibre disc
2-CUTTER SDS-PLUS HAMMER DRILL BITS Red Stripe
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
WÜPLAST® pan head screw with flange and hexagon socket WN1451, A2 stainless steel
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 8.8, plain