Blind rivet, open, with break mandrel and countersunk head ISO 15978, countersunk head, aluminium/steel
ISO 15978 aluminium/steel zinc ptd. counters. head
RIV-ISO15978-L-ALU/ST-(6,0-8,0)-2,4X10
Register now and access more than 20,000 products
Sleeve: Plain aluminium; pin: Zinc-plated steel, blue passivated
The dimensions and tolerances defined in EN ISO 15978 must be observed.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 2.4 mm |
Length (l1) | 10 mm |
Head diameter (dk) | 5.0 mm |
Head height (k1) | 1.0 mm |
Material of sleeve | Aluminium |
Material of mandrel | Steel |
Surface of the sleeve | Plain |
Surface of the mandrel | Zinc plated |
Min./max. grip range | 6.0-8.0 mm |
Drill hole diameter | 2.5 mm |
Shear-fracture load | 250 N |
Tensile fracture load | 350 N |
Nominal diameter x length (Ø d x l) | 2.4 x 10 mm |
Head type | Countersunk head 120 degree |
Head angle | 120 Degree |
Last viewed
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, plain
Cylindrical pin, hardened ISO 8734 steel plain, type A hardened, tolerance class m6
Chuck For hand-lever grease guns
Nail anchor SHARK® Hammer TYPE SK
Hammer drill bit Plus Duo-S Vario
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 8.8, plain
Cheese head screw with hexagon socket head and shoulder ISO 7379, steel 12.9, plain, tolerance h8
Flat drill bit assortment 6 pieces
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
High-performance fastening base with cable tie