Blind rivet, open, with break mandrel and countersunk head ISO 15978, countersunk head, aluminium/steel
ISO 15978 aluminium/steel zinc ptd. counters. head
RIV-ISO15978-L-ALU/ST-(7,0-9,0)-3,2X12
Register now and access more than 20,000 products
Sleeve: Plain aluminium; pin: Zinc-plated steel, blue passivated
The dimensions and tolerances defined in EN ISO 15978 must be observed.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 3.2 mm |
Length (l1) | 12 mm |
Head diameter (dk) | 6.7 mm |
Head height (k1) | 1.3 mm |
Material of sleeve | Aluminium |
Material of mandrel | Steel |
Surface of the sleeve | Plain |
Surface of the mandrel | Zinc plated |
Min./max. grip range | 7.0-9.0 mm |
Drill hole diameter | 3.3 mm |
Shear-fracture load | 500 N |
Tensile fracture load | 700 N |
Nominal diameter x length (Ø d x l) | 3.2 x 12 mm |
Head type | Countersunk head 120 degree |
Head angle | 120 Degree |
Last viewed
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, plain
Cable ties with metal latch closure – industrial quality
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Twist drill bit HSCo DIN 338 MFD Speed
Industry Clean cleaner
WÜPLAST® pan head screw with flange and hexagon socket WN 1451, steel 10.9, zinc-plated, transparent passivated (A3K)
Spacing assembly screw AMO® III 11.5
Cable ties with plastic latch closure – industrial quality
Twist drill bit HSS DIN 338 type RN 130°
Square wedge-shaped washer DIN 6918, 295-350 HV, hot-dip galvanised, wedge-shaped, for high-tensile prestressed bolt on U-profile