Blind rivet, open, with break mandrel and flat head ISO 15977, dome head, aluminium/steel
ISO 15977-L flat head aluminium/steel zinc plated
RIV-ISO15977-L-ALU/ST-(5,0-7,0)-6,0X12
Register now and access more than 20,000 products
- Standardised "ISO product" with standardised test criteria (see DIN EN ISO 14589)
- Sleeve: Aluminium AlMg 2.5
- Mandrel: Zinc-plated steel, blue passivated (A2K)
The dimensions and tolerances defined in EN ISO 15977-L must be observed.
Tensile forces and shear forces in line with ISO 15977 class L
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter x length (d1 x l1) | 6 x 12 mm |
Min./max. grip range | 5.0-7.0 mm |
Head diameter (dk) | 12.6 mm |
Head height (k1) | 2.5 mm |
Min./max. drill hole diameter | 6.1-6.2 mm |
Shear-fracture load | 2100 N |
Tensile fracture load | 3000 N |
Material of sleeve | Aluminium |
Material of mandrel | Steel |
Surface of the sleeve | Plain |
Surface of the mandrel | Zinc plated |
Drill hole diameter | 6.1 mm |
Standards | ISO 15977 |
RoHS-compliant | Yes |
Head type | Dome head |
Mandrel diameter (dm) | 3.4 mm |
Last viewed
Thin-walled heat-shrink hose Shrink rate 2:1 without internal adhesive
Cable ties with plastic latch closure – industrial quality
JIS B1111 steel 4T zinc plated H
Countersunk head screw with hexagon socket ISO 10642, A4-070 stainless steel, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Cable ties with plastic latch closure – industrial quality
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Adhesive base for cable ties, screw-on 50.8x50.8 mm – industrial quality
Twist drill bit HSS DIN 338 type RN 130°