Cable tie with mounting eyelet
Special cable tie, plastic latch with eyelet
CBLTIE-CLAMP-BLCK-M6-7,6X229MM
Register now and access more than 20,000 products
- Weather-resistant material is more resistant to ultraviolet radiation – suitable for indoor and outdoor applications
- For attaching a cable bundle on a different surface, e.g. control panel, wall or ceiling
- The design enables bundling to take place either before or after tightening the clamp cable connector
- One-piece design for consistent performance and reliability
- The rounded tip is easy to grip on surfaces and allows for faster initial insertion for reduced installation time
- UV-resistant and weather-resistant
Width of band (B) | 7.6 mm |
Width | 7.6 mm |
Length (L) | 229 mm |
Material | PA 6.6 - Polyamide |
Min./max. temperature resistance | -40 to 85 °C |
Ultraviolet resistance | Yes |
Colour | Black |
Halogen-free | Yes |
Silicone-free | Yes |
Max. tensile force | 534 N |
Datasheets(X)
Last viewed
Cylindrical pin, hardened ISO 8734 steel plain, type A hardened, tolerance class m6
Single wire seal (SEAL) For uninsulated cable connector
Hexagonal bolt with thread up to the head
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, ≤ M24 A2-70 stainless steel, ≥ M24 A2-50 stainless steel
Hexagonal bolt with thread up to the head
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, ≤ M24 A2-70 stainless steel, ≥ M24 A2-50 stainless steel
C 8.0 TX bit (5/16 inch) C 8.0 (5/16 inch)
Plus Quadro-L Vario hammer drill bit
Cable ties with plastic latch closure – industrial quality