Cartridge gun Airquick
Pneumatic cartridge gun, Airquick
CARTGUN-PN-AIRQUICK-310ML
Register now and access more than 20,000 products
- Piston rod design
- Ergonomically shaped handle
- Fast extrusion
- Adjusting the rotating pressure regulator on the handle enables fine adjustment of the flow speed
- Screwing on the bag piston provided also allows 400-ml bags to be used
The average consumption for pneumatic application guns is approx. 7.2 litres/minute. Caution: The maximum working pressure for applying sealants is 6 bar.
The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
Suitable for | 310 ml cartridge, 400 ml bag |
Length | 470 mm |
Connection thread | 1/4 inch |
Weight of machine | 1700 g |
Last viewed
Countersunk slotted head screw, Z DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
Countersunk head screw with hexagon socket ISO 10642, A4-070 stainless steel, plain
Blind rivet, open, with break mandrel and countersunk head ISO 15978, countersunk head, aluminium/steel
Circlip pliers, shape C For bore circlips
Hand Cleaning Set
Twist drill bit HSCo DIN 338 MFD Speed
Hexagonal bolt with thread up to the head
Socket contact Micro Quadlok System (MQS) 0.63 Uninsulated
Table-top roll holder For cleaning paper