Circlips for shaft, standard version DIN 471, standard design, steel zinc flake
DIN 471 steel zinc flake, standard version
CRCLIP-SHFT-DIN471-A-FLZNNC480H-135X4,0
Register now and access more than 20,000 products
Datasheets(X)
 | |
Suitable for shafts | 135 mm |
Suitable for groove diameter | 131 mm |
Internal diameter (d1) | 128 mm |
Eye width (a1) | 11.8 mm |
Width (b1) | 11.0 mm |
Thickness (s1) | 4.0 mm |
Standards | DIN 471 |
Design | Standard design |
Material | Spring steel |
Surface | Flake zinc |
RoHS-compliant | Yes |
Corrosion protection period/conditions | 480 h / in accordance with DIN EN ISO 9227 |
Last viewed
Protective glove Nitrile Softflex
WÜPLAST® pan head screw with hexalobular drive WN 1452, A2 austenitic steel
Rivet nut with countersunk head and knurled shank
Countersunk head screw with recessed head Z DIN 965, A2 stainless steel, plain
Pipe and fastening clamp Multifix
Twist drill bit HSS DIN 338 TYPE RN
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Adhesive base ABM112 PA
Female thread plug-in nipple series 2000
Pan Head screw with hexalobular head ISO 14583, A2-70 stainless steel, plain