Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
SPGPIN-ISO8752-ST-10X160
Art.-no. 047510 160
EAN 4053478357868
Register now and access more than 20,000 products
- Fastening elements, similar use to grooved pins.
- For use as a screw and bolt sleeve for high shear loads.
- Relieves load on bolts and screws, allowing smaller sizes to be used.
- An oversize of 0.2 to 0.5 mm relative to the nominal diameter ensures a secure, tight fit.
- Tapered end makes it easier to drive into the hole.
- The pins can be driven out again without damage.
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
 | |
Nominal diameter (d1) | 10 mm |
Length (l1) | 160 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Last viewed
Thread mandrel for PEG 312
1-component universal knife with robust blade and high-quality holster
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Countersunk head screw with hexagon socket ISO 10642, A4-070 stainless steel, plain
Carpet knife with slim, extremely robust metal handle
Oblique cutters short head for use in tight spaces
Digital vernier callipers, fractional
Hexagon bolt with thread up to the head ISO 4017, steel 8.8, plain
30-mm flat chisel, hex.
WÜPLAST® flanged pan head screw with hexalobular recess WN 1451, steel 10.9, zinc plated, transparent passivated (A3K)