Comb nail / anchor nail
Ridge nail/anchor nail steel zinc plated
RIDGNL-(A3K)-4X50MM
Register now and access more than 20,000 products
- The tapered section below the nail head ensures that the nail fills the hole in the wood connector ensuring an exact transfer of force
Nails in accordance with DIN EN 14592 and A1 (Eurocode 5)
Datasheets(X)
Angle brackets, joist hangers, cross connectors, steel plates and moulded steel plate parts, rafter-to-purlin connectors, rafter foot fittings, perforated plates, flat steel anchors, diagonal bracing etc.
Diameter | 4 mm |
Length | 50 mm |
Head diameter | 8 mm |
Material | Steel |
Surface | Zinc plated |
Thread length | 40 mm |
Last viewed
Twist drill bit HSS DIN 338 TYPE RN
2-component safety knife With automatic, complete blade retraction and a bi-metal blade
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Cable knife
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Arizona® Perfect soft vehicle dry abrasive paper For all paint repair work with intermediate and fine sanding
Blind rivet, open, with break mandrel and flat head ISO 15977, dome head, aluminium/steel
1 inch power connector with 3/4 inch square drive and ball locking mechanism
Y-hose connector