Combined abrasive fleece/cloth matting body (mixed corundum)
Combi matting body
MATBDY-COMBI-G180/150-40X30X6MM
Register now and access more than 20,000 products
High sanding effect
Additional abrasive cloths between the abrasive fleece
- At high rotation speeds, coarse grain acts finer, and at low speeds fine grain acts coarser
- Use tools with a low contact pressure; heavy contact pressure causes premature wear
- If there is insufficient removal, do not increase the contact pressure. Instead, use coarser grains
Datasheets(X)
Diameter x width x shaft diameter | 40 x 30 x 6 mm |
Colour | Red brown |
Material to be processed | Forged steel, Malleable cast iron, Grey cast iron, C-steel, Deep-drawn steel, Steels bands, Injection-moulded zinc, Non-ferrous metal, Cr-Ni and other stainless steels, Wood |
Last viewed
Application gun WIT-Multi
Single wire seal (SEAL) For uninsulated cable connector
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread (ISO-compliant). Steel, 8.8U, hot-dip galvanised (hdg).
Hexagon nut with trapezoidal thread
Lock washer
Application gun HandyMax
Twist drill bit HSS DIN 340 type RN 130°
Slotted cylinder head screw ISO 1207, A2-70 stainless steel, plain
Eye bolt DIN 444, steel 4.6, zinc-plated, blue passivated (A2K), shape B
Screw-on fastening base