Compressed-air filter / Regulator Automatic
Pressure regulator UFR w. filter a. man. automatic
PRESREGL-PN-MODULAR-AUTODRAIN-1/2IN
Register now and access more than 20,000 products
Automatic Drain
Automatically opens when the liquid in the bowl reaches a certain level
No flow loss and no problems with leaks
No double nipples required for connection.
Easy mounting
Wall bracket included.
Minimal space requirement
Block design.
High degree of cleaning of the compressed air
With 5 μm filter element
Precise adjustment of the working pressure
From 0.5 to 10 bar
Lockable pressure regulator
Fixes the set working pressure
- Observe the correct installation of the air intake as indicated on the device.
- The unit must to be installed vertically with the plastic containers turned down to ensure the proper operation.
- Before removing the cup, make sure there is no air pressure in the unit.
Datasheets(X)
Professional and industrial use on pneumatic systems (compressed air) in mechanical and tire workshops, automotive body shops, metalworking and carpentry.
The service units consists of two components:
- The filter: cleans the air of dirt and condensed water.
- The regulator / manometer: enables the setting of the exact working pressure for optimum tool performance.
Tip:
The service unit should always be installed as close to the consumers as possible.
 | |
Construction size | 0 - not applicable |
Connection thread | 1/2 inch |
Flow capacity | 2600 l/min |
Min./max. operating pressure | 0.5-10 bar |
Last viewed
WLA 18.0 cordless LED work lamp With two high-performance LED arrays
GEFU® thread-rolling screw With flat head and hexalobular drive (Txplus), serrated
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
Twist drill bit HSCo DIN 338 MFD Speed
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, A2-070 stainless steel, plain
Cylindrical pin, hardened ISO 8734 steel plain, type A hardened, tolerance class m6
System case 4.4.2
Locking disc spring washer, shape S Spring steel hardened 420-510 HV10, zinc-flake coated
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly