Compression cable lug DIN 46235
Compression cable lug DIN 46235
COMPCBLLUG-DIN46235-CU-M10,0/35SMM
Register now and access more than 20,000 products
- For single, multi, fine and superfine wire copper conductors e.g. in accordance with DIN EN 60228 Class 1, 2, 5 and 6
- With markings for correct crimping
The user must check the inserted cable (using a pull-out test, if required).
Datasheets(X)
 | |
Wire cross section | 35 mm² |
Flange hole | M10 |
Code number according to standard | 12 |
Wire diameter (d1) | 8.2 mm |
Diameter of hole (d2) | 10.5 mm |
Distance between sleeve end and centre of hole (l1) | 42 mm |
Sleeve length | 20 mm |
Width (b) | 19 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Half-shell pin crimping insert
Standard cable tie with plastic latch
Plastic holder For double open-end wrench assortment
Adhesive base for cable ties, screw-on 50.8x50.8 mm – industrial quality
Flat washer with chamfer for high-strength fittings
Cable ties with plastic latch closure – industrial quality
ECOLINE cleaning paper
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Rivet nut with small countersunk head Zinc-plated steel, blue passivated
Solder cable lug DIN 46211