Compression cable lug DIN 46235
Compression cable lug DIN 46235
COMPCBLLUG-DIN46235-M5,0/10SMM
Register now and access more than 20,000 products
- For single, multi, fine and superfine wire copper conductors e.g. in accordance with DIN EN 60228 Class 1, 2, 5 and 6
- With markings for correct crimping
The user must check the inserted cable (using a pull-out test, if required).
Datasheets(X)
 | |
Wire cross section | 10 mm² |
Flange hole | M5 |
Code number according to standard | 6 |
Wire diameter (d1) | 4.5 mm |
Diameter of hole (d2) | 5.3 mm |
Distance between sleeve end and centre of hole (l1) | 27 mm |
Sleeve length | 10 mm |
Width (b) | 9 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Thread former For W.TEC® INSERT COIL helical inserts - made of HSCo; shape C
TIME-SERT® UNC threaded bushing
Machine tap For W.TEC® INSERT COIL helical inserts - made of HSCo; shape C
Hexagon nut DIN EN 14399-4, steel 10Z, hot-dip galvanised, for high-strength structural bolting assemblies
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
C 6.3 bit hexagon socket (1/4 inch) with patented POWERDRIV® drive
Serrated lock washer, internally serrated, shape J DIN 6798 stainless steel. Internally serrated.
Twist drill bit HSS DIN 338 type RN 130°
Cable grommet TPE
Cable grommet TPE