Conical drive-in nipple DIN 71412, shape A, steel, zinc-plated
DIN 71412 steel zinc plated H shape A
NPL-DIN71412-A-H1-(A3F)-6
Register now and access more than 20,000 products
Drive-in grease nipples are manufactured oversized. Depending on the material, installation tests may be necessary.
Drive-in grease nipples are only suitable for low pressures.
 | |
Standards | DIN 71412 |
Form | A, H1 |
Material | Steel |
Surface | Zinc plated |
Diameter of tenon (d1) | 6 mm |
Length (l1) | 15 mm |
Length of tenon (l2) | 5.5 mm |
Guideline values for hole diameters | 6 mm |
RoHS-compliant | Yes |
Datasheets(X)
CAD data (available after login)
Last viewed
Countersunk head screw with hexagon socket ISO 10642, A4-070 stainless steel, plain
Blind rivet, open, with break mandrel and countersunk head ISO 15978, countersunk head, aluminium/steel
Countersunk head screw with hexagon socket ISO 10642, A4-070 stainless steel, plain
Flat connector Junior Power Timer (JPT) 2.8
WÜPLAST® pan head screw with hexalobular drive WN 1452, steel 10.9, zinc-plated, transparent passivated (A3K)
Ring-shaped crimp cable lug DIN 46234 and similar
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly