Contact spray

Name: Contact spray
Brand: Würth
SKU: 0890100

Contact spray
CNTCTSPR-300ML

Art.-no. 0890100

EAN 4058794427646

All versions

Prices for customers after login

Contact spray

Art.-no. 0890100

Prices for customers after login

Quantity

x 12 pcs

Exclusively for trade customers

Login/Register
Call customer service: +603-8021 0200

Is quick and reliable at rectifying ignition problems

To be used as a preventative measure against ignition problems caused by moisture in vehicles and in other low-voltage ignition systems

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Chemical Products are restricted and it is not allowed to deliver this item outside Malaysia

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Cleans the ignition cable, distributor caps and connectors

Contents	300 ml
Colour	Light yellow
Smell/fragrance	Characteristic
Shelf life from production	24 Month
Chemical basis	Mineral oil
Density	0.743 g/cm³
Density conditions	at 20°C

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 2

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 3

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.