Copper paste CU 800

Name: Copper paste CU 800
Brand: Würth
SKU: 08938001

Copper paste CU 800
PAST-(CU-800)-TUBE-100G

Art.-no. 08938001

EAN 4058794442786

All versions

Similar products

Prices for customers after login

Copper paste CU 800

Art.-no. 08938001

Prices for customers after login

Quantity

x 10 pcs

Exclusively for trade customers

Login/Register
Call customer service: +603-8021 0200

Highly adhesive lubricating, separating and anti-corrosive copper paste that is extremely resistant to high temperatures and high pressures

Very high resistance

Can be used at temperatures between -20°C to +1200°C for dry lubrication

Resistant to water, diluted alkalis and acids

Great, long-lasting lubricating effect

Provides long-lasting protection against burning-on and seizing, cold welding, wear, corrosion and frictional corrosion.

Silicone and AOX-free

Notice

Do not apply to brake discs or brake lining. Silicone and AOX-free

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Chemical Products are restricted and it is not allowed to deliver this item outside Malaysia

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

The high temperature-resistant lubricant is suitable for lubricating the backs of disc brake pads (prevents squeaking noises), screw connections (exhaust manifold screws, spark plug threads etc.), bearings, pivot points, joints, sliding surfaces etc. Prevents solid seals from becoming baked on and is also suitable for contact protection on the nozzles of gas-shielded arc welding guns and on batteries and battery terminals.

Instructions

Clean the parts to be treated with brake cleaner, art. no. 0890 108 7. The parts must be clean, dust-dry and free from grease. Brush the surface to be treated thinly and evenly with CU 800.

Contents	100 ml
Chemical basis	Soft metal-containing semi-synthetic base grease
Colour	Copper
Density	1 g/cm³
Smell/fragrance	Characteristic
Min. temperature conditions	-20 °C
Max. temperature conditions	1200 °C
Min. flashing point	200 °C
Kinematic oil basis viscosity	7 mm²/s
Conditions for viscosity of oil basis	at 40°C
Silicone-free	Yes
AOX-free	Yes
Weight of content	100 g
Container	Tube
Shelf life from production	36 Month

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.