Countersink bit HSS 90°
Countersink bit
CNTSNK-CONI-MA-HSS-BIT-3BLDE-90DGR-D6,3
Register now and access more than 20,000 products
Standardised 1/4 inch hexagon shank
No slipping in the drill chuck, suitable for bit holders
Rapid change between countersinking and screwing possible
Product packaging made from 100 % PCR (recycled plastic from household waste) and 100 % recyclable
Increased service life and cutting performance by using drilling and cutting oil or cutting paste.
Datasheets(X)
Use in electric screwdrivers, drills and hand deburrers for processing conventional steels, non-ferrous metals and plastics
 | |
Material to be processed | Non-ferrous metal, Steel |
Spot-facer diameter (d1) | 6.3 mm |
Length (l1) | 31 mm |
Number of cutting edges (Z) | 3 PCS |
Cutting material | HSS |
Countersink angle | 90 Degree |
Surface | Plain |
Service life (points system) | 2 of 4 points |
Countersinking speed (point system) | 2 of 4 points |
Countersinking quality (point system) | 2 of 4 points |
Versatility (points system) | 2 of 4 points |
Countersinking behaviour (point system) | 2 of 4 points |
Material of sub-group | General structural steels, Non-alloyed tempering steels, Alloyed tempering steels, Nitriding steels, Tool steels, High-speed steels, Cast iron, Ductile iron, Malleable cast iron, White cast iron, Aluminium, Aluminium alloys, Aluminium wrought alloys, Aluminium casting alloys (<10% silicon), Aluminium casting alloys (>10% silicon), Magnesium alloys, Copper, low-alloyed, Brass, short-chipping, Brass, long-chipping, Bronze, short-chipping, Bronze, long-chipping, Plastics, thermoset, Plastics, thermoplastic, Plastics, aramide-fibre reinforced, Plastics, glass/carbon-fibre-reinforced |
Last viewed
O-ring, metric
O-ring, metric
Wedge and wheel lock nut
Circlip with tabs
Twist drill bit HSCo DIN 338 MFD Speed
Raised countersunk tapping screw, shape C with Z recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), PZ drive, round head, shape C
Compression spring DIN 2095 spring steel wire, zinc-plated steel
Blind rivet, open, with break mandrel and flat head ISO 15979, dome head, steel/steel
Hammer drill bit, Longlife Quadro-L with SDS-plus drill chuck
WÜPLAST® pan head screw with Z Phillips head WN 1412, steel 10.9, zinc-plated, transparent passivated (A3K)