Crimp cable lug, pin shape DIN 46230 and similar
Crimp cable lug pin shape
CRMPCBLUG-DIN46230-4,0-6,0SMM
Register now and access more than 20,000 products
For multi, fine, and very fine-wired copper conductors, e.g. according to DIN EN 60228 Class 2, 5, and 6
The user must check the inserted cable (using a pull-out test, if required)
Datasheets(X)
Min./max. wire cross section | 4-6 mm² |
Wire diameter (d1) | 3.6 mm |
Sleeve length | 6 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Width of pin | 2.7 mm |
Last viewed
Wing repair washer according to DIN 522, zinc-plated steel, blue passivated (A2K)
Wing repair washer according to DIN 522, zinc-plated steel, blue passivated (A2K)
Hexagon bolt with thread up to the head DIN 933, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, ≤ M24 A2-70 stainless steel, ≥ M24 A2-50 stainless steel
Hexagon bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Hexalobular-type cheese head screw ISO 14579, A2-070 stainless steel, plain
Hexalobular-type cheese head screw ISO 14579, A2-070 stainless steel, plain
Countersunk head screw with hexagon socket ISO 10642, A4-070 stainless steel, plain
Circlip pliers, shape B for shaft circlips