Double nipple
Double nipple, brass
DBNPL-MS-ET-G3/4XR3/4IN
Register now and access more than 20,000 products
Datasheets(X)
 | |
Material | Brass, suitable for drinking water |
Connection thread | ET G 3/4 inch x ET R 3/4 inch |
DN nominal width | DN 16 |
Width across flats (SW) | 30 mm |
Length (L) | 37 mm |
Min. contact surface of gasket (S1) | 2 mm |
Last viewed
Countersunk slotted head screw, Z DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
Wire end brush Stainless steel, crimped, with shank
Rubber washer For vacuum lifter
Hexagonal bolt with thread up to the head
Twist drill bit HSS DIN 338 TYPE RN
Pan head tapping screw with flange
Swivel brackets1
2-CUTTER SDS-PLUS HAMMER DRILL BITS Red Stripe
Square wedge-shaped washer DIN 6917, 295-350 HV, hot-dip galvanised, wedge-shaped, for high-tensile prestressed bolt on I-profile
Cable ties with plastic latch, detectable – industrial quality