Dry lubricant spray PTFE

Name: Dry lubricant spray PTFE
Brand: Würth
SKU: 0893550

Dry lubricant spray PTFE
DRYLUBSPR-PTFE-300ML

Art.-no. 0893550

EAN 4065746330800

All versions

Prices for customers after login

Dry lubricant spray PTFE

Art.-no. 0893550

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: +603-8021 0200

Dry lubrication, does not attract dirt and dust

Eliminates squeaks, creaks and stiff movement

Offers lasting wear protection

Film thickness of 10 µm

Can be used for even the smallest tolerances in precision engineering

Very high resistance

Resistant to temperatures from –180°C to +260°C (briefly)

Permanently resistant to water, acids and alkalis

Mineral-oil-free

Silicone-free

Notice

Smokers must wash their hands after use. Smoking contaminated tobacco products may cause health-related issues.

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.

Chemical Products are restricted and it is not allowed to deliver this items outside Malaysia

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Transparent, dirt-resistant dry lubricant for light to medium loads.

Instructions

Shake briefly before use. Spray a thin layer onto friction points or joints and allow to dry, drying time for a thin application: approx. 1-2 mins, drying time for a thicker application: approx. 5 mins.

Chemical basis	Polytetrafluoroethylene
Colour	Milky-transparent (protective film)
Density	0.6 g/cm³
Smell/fragrance	Characteristic
Min. temperature conditions	-180 °C
Max. temperature conditions	260 °C
Boiling point	-44 °C
VOC concentration (CH)	588.66 g/l
Silicone-free	Yes
Acid-free	Yes
Resin-free	Yes
Mineral oil-free	Yes
AOX-free	Yes
Contents	300 ml
Container	Aerosol can
Shelf life from production	24 Month

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.