Ejector DIN 317
Ejector drift morse taper
EJCTRDRIFT-DRL-MK1/MK2
Register now and access more than 20,000 products
For ejecting morse taper tools from reducing sleeves.
Datasheets(X)
Suitable for morse taper tools | MK 1, MK 2 |
Length | 140 mm |
DIN | 317 |
Last viewed
Blind rivet, open, with break mandrel and flat head ISO 15979, dome head, steel/steel
Twist drill bits HSS DIN 338 type RN TIN head
AW® bit
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, ≤ M24 A2-70 stainless steel, ≥ M24 A2-50 stainless steel
Cylindrical pin, hardened ISO 8734 steel plain, type A hardened, tolerance class m6
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Square wedge-shaped washer DIN 6918, 295-350 HV, hot-dip galvanised, wedge-shaped, for high-tensile prestressed bolt on U-profile
Cable ties with metal latch closure – industrial quality