Electrical brake bleeder
Electrical brake bleeder, 60 litres
BRKBLEDR-EL-60LTR
Register now and access more than 20,000 products
Pressure continuously adjustable from 0.4 to 3.5 bar
Suitable for all vehicles with ABS (specified operating pressures).
Works from the original barrel up to 60 litres
No time-consuming decanting and no danger of moisture absorption.
Switches off when barrel is empty to prevent air from being drawn in
No time-consuming bleeding of device necessary when changing container.
Additional low-pressure test
Simple and rapid brake system leak test and checking of brake pistons for smooth movement.
Mobile device with controls at working height
Fatigue-free, comfortable working
High-quality epoxy coating
Resistant to brake fluid
Scope of delivery:
- Barrel device with adapter storage compartment
- Barrel sealing cap with intake pipe
- Euro adapter art. no. 071455 301 (E 20 for almost all European passenger vehicles)
- Chain sling for securing barrel
Use only mineral oil-free brake fluids
Datasheets(X)
Max. contents | 60 l |
Min./max. operating pressure | 0.4-3.5 bar |
Length of feed hose | 350 cm |
ABS-compliant | Yes |
Suitable for electro-hydraulic brakes | Yes |
Length | 64 cm |
Width | 51 cm |
Cable length | 480 cm |
Height | 98 cm |
Nominal voltage | 230 V/AC |
Weight | 22 kg |
Thread type | Tapered external pipe thread, Whitworth |
Thread type x nominal diameter in inches | R 2 in |
Last viewed
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, A2-070 stainless steel, plain
Cylindrical pin, hardened ISO 8734 steel plain, type A hardened, tolerance class m6
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, A2-070 stainless steel, plain
IFI-111 steel GR8 zinc-plated yellow
Cable ties with plastic latch closure – industrial quality
Paint spray gun polyester filler gun AP P For highly viscous materials for filling
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Countersunk head screw with hexagon socket ISO 10642, A4-070 stainless steel, plain
Countersunk slotted head screw, Z DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
Adhesive base for cable ties, screw-on 25.4x25.4 mm – industrial quality