Expanding nut with closed screw-in area for round holes
Expanding nut with closed thread section
EXPNDNUT-FORD-TRANSPARENT
Register now and access more than 20,000 products
- One-sided assembly, thus nut locking function
- Cannot be twisted
- Corrosion resistant
- High retention force and secure seat in the component
- Flange can serve as a spacer
- No direct contact between sheet metal and screw
- Can be used again after removal
Datasheets(X)
For fastening sheet metal with screws.
 | |
Suitable for screw | Diameter 4.8 mm |
Min./max. drill hole diameter | 8.20-16.20 mm |
Min./max. attachment thickness | 0.9-0.90 mm |
Width of head (D) | 7.80 mm |
Length of head (E) | 10.00 mm |
Length below head (C) | 12.00 mm |
Overall height (B) | 12.50 mm |
Colour | Neutral |
Material | PA 66 - Polyamide |
Suitable for vehicle manufacturer | Audi, Seat, Skoda, Ford, Volkswagen |
Corresponds to original spare part number | N90786701, 6649923, 6150260 |
Installation location | Engine compartment, Bodywork, Universal |
Last viewed
Spray hose For air-conditioning disinfectant spray
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Cable ties with metal latch closure, heat-stabilised and weather-resistant – industrial quality
Countersunk head screw with hexagon socket ISO 10642, A4-070 stainless steel, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, ≤ M24 A2-70 stainless steel, ≥ M24 A2-50 stainless steel
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, ≤ M24 A2-70 stainless steel, ≥ M24 A2-50 stainless steel
2-CUTTER SDS-PLUS HAMMER DRILL BITS Red Stripe
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Connector DIN 7428 with SDS-plus mount
Welded stud