Fabric hazard marking tape
HARDWARNFABADHTPE-YELL/BLACK-R-75MMX50M
Art.-no. 081244 681
EAN 4056807861135
Register now and access more than 20,000 products
PE-coated, glossy and waterproof artificial silk fabric
- Water- and dirt-repellent - also suitable for outdoor and damp areas.
- Tear-resistant, robust and abrasion-resistant.
- Very good resistance to ageing.
- Visually striking due to the yellow/black colour.
- Highly visible for hazardous areas and obstacles.
- Left-pointing and right-pointing versions guide you past the obstacle in a targeted manner.
Strong, shear-resistant natural rubber adhesive
- Allows immediate adhesion.
- Can be removed from most surfaces without leaving any residue.
- Easy to tear off by hand and can be labelled.
Versatile application
- In addition to marking obstacles and hazardous areas, the fabric tape is also ideal for connecting, fastening, bundling, repairing and sealing.
- Also suitable for rough surfaces.
- Meets the requirements of ASR A1.3, DIN 4844 or DIN EN ISO 7010.
Fast, flexible and cost-effective
- Adapts well to edges and uneven surfaces.
- Not suitable for floor marking.
- The left-pointing and right-pointing versions guide the viewer past obstacles on the left or right side in a targeted manner.
The usage instructions are recommendations based on the tests we have conducted and our experience. Carry out your own tests before each application. Due to the large number of applications as well as storage and usage conditions, we do not assume any liability for a specific application result.
Any technical information or advice provided by our free customer service shall be provided to the exclusion of any liability, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting wilfully. We ensure the consistent quality of our products. We reserve the right to make technical changes and further developments to our products.
Datasheets(X)
Ideal for rough surfaces such as steel beams, walls, pipes, machines, gates and passenger vehicle lifts. It reliably indicates hazardous areas such as edges, protruding corners, crush hazards and entrapment hazards in manufacturing plants, warehouses and industrial environments, indoors and outdoors.
The cloth-backed hazard warning adhesive tape is versatile: Bonding, securing, bundling, repairing, sealing and marking.
The adhesive tape adapts to unevenness and can be removed from most surfaces without leaving any residue.
For optimal adhesion, the surface must be clean, dry and free from release agents such as grease, oil, surfactants, dirt and dust. On certain surfaces, it is also recommended to use a butyl primer - especially on concrete and asphalt, untreated or uncoated wood as well as on rough or textured surfaces.
To increase adhesion and durability, the hazard warning adhesive tape should be firmly pressed down after application. A press-on roller is particularly suitable for this purpose.
Colour | Yellow-black |
Material | Fabric - plastic coated |
Adhesive base | Natural rubber |
Length | 50 m |
Width | 75 mm |
Thickness | 300 µm |
Design | Right-pointing |
Min./max. processing temperature | 5 to 35 °C |
Min./max. temperature conditions | 0 to 40 °C |
Shelf life from production/conditions | 18 Month / storage dry, dust-free and protected from light, max. 25°C |
Last viewed
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, ≤ M24 A2-70 stainless steel, ≥ M24 A2-50 stainless steel
Cable tie BT -300 PA
Twist drill bit HSS DIN 338 type RN 130°
Metric combination wrench with POWERDRIV®
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, A2-070 stainless steel, plain
C 6.3 TX bit (1/4 inch) with borehole
WÜPLAST® pan head screw with hexalobular recess WN 1452, steel 10.9, zinc plated, transparent passivated (A3K)
Lock washer NF E 25511 A2 stainless steel, without toothing on the underside
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, plain
Wall bracket