Fabric hazard marking tape
Hazard warning fabric adhesive tape self-adhesive
HARDWARNFABTPE-SA-YELL/BLACK-R-75MMX50M
Register now and access more than 20,000 products
- Self-adhesive
- Excellent adhesion properties
- Dense, firm and tightly woven fabric
- Easy to tear off by hand
- Good abrasion resistance
- Mesh size of 80 mesh
- Meets the requirements of DIN 4844 or DIN EN ISO 7010
- Yellow-black tape for permanent hazard points and obstacles
- Guidance past hazard points by directing to the left/right
- The adhesion surface must be dry and free from grease and dust.
Datasheets(X)
The solution for rough surfaces such as steel beams and walls of hazardous areas, such as edges of all kinds, work areas, car lifting platforms.
Colour | Yellow-black |
Material | Fabric - plastic coated |
Adhesive base | Natural rubber |
Length | 50 m |
Width | 75 mm |
Thickness | 0.29 mm |
Design | Right-pointing |
Last viewed
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated (A2K)
Fixanchor W-FAZ/S
KL draw bolt For M12-M63 and PG9-PG48 hole punchers
Electronic solder no. 1
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Contact spray SW
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Metric double box-end wrench with POWERDRIV®
PTFE thread-sealing tape