Fan Wheel Useit® S/G Metal
Flap wheel Useit
FLPWHL-F/CLTH-G600-40X20X6
Register now and access more than 20,000 products
Can achieve very high gloss without polishing paste
Reduced work effort, time savings
Material: foam grid / fabric
Does not leave sanding grooves, reduced working time
Finer sanding pattern compared with fleece.
Achieve sanding patterns not possible with fleece, save costs
Structure of grain carrier
- polyamide fabric
- + polyurethane foam
- + polyamide mesh
Bonding agent
synthetic resin
Abrasive grain
silicon carbide (dark grey)
Suitable for electrical or pneumatic drills, flexible shaft
Because of the elasticity of the foam backing material the tip of the grain does not penetrate the processed material as deeply as is the case with conventional abrasives. In this way, the formation of sanding grooves is avoided, which in turn results in a very high gloss without the necessity of using polishing paste or felt.
Attention: Pay attention to the running direction!
Tools are only suitable for clockwise rotation.
Datasheets(X)
For sanding and polishing of tight radii (finish sanding), such as stainless steel, copper, brass and aluminium.
Diameter x width x shaft diameter | 40 x 20 x 6 mm |
Grinding pattern | 600 |
Material of abrasive medium | Silicon carbide |
Max. rotation speed | 9000 rpm |
Shank diameter | 6 mm |
Width | 20 mm |
Diameter | 40 mm |
Last viewed
Single wire seal (SEAL) For uninsulated cable connector
Turnbuckle with eyes
Twist drill bit HSS DIN 338 TYPE RN
Hexagon head bolt with thread up to head ISO 4017, A4-50 stainless steel, plain
Twist drill bit HSS DIN 338 TYPE RN
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, A2-070 stainless steel, plain
Screw-on fastening base
Apparatus castor with rotating holder and locking brake
Pan Head screw with hexalobular head ISO 14583, A2-70 stainless steel, plain
Twist drill bit HSS DIN 338 type RN 130°