Female thread plug-in nipple series 2000
Series 2000 female thread plug-in nipple
NPL-PN-S2000-IT-G1/4IN
Register now and access more than 20,000 products
High flow rate of up to 2100 l/min and a maximum operating pressure of 16 bar.
Enables optimum compressed air supply and output utilisation of compressed air consumers, resulting in greater productivity and lower energy costs.
Airtight connections
Low power consumption and high efficiency
Hardened steel nipples
For max. load-bearing capacity and long service life.
Exposed surfaces are chrome-plated, nickel-plated or galvanised.
High corrosion resistance – protected even under demanding conditions.
Series 2000 fittings comply with the European standard and have a nominal width of 7.6 mm.
Euro profiles are compatible with other compressed air fittings.
Material: Steel
Datasheets(X)
Material | Steel |
Connection thread | IT G 1/4 inch |
Length (L) | 36 mm |
Surface | ZN 8 silver |
Width across flats (SW) | 17 mm |
Max. pressure | 16 bar |
Flow capacity | 2.1 l/min |
Min./max. temperature resistance | -20 to 100 °C |
Last viewed
Adhesive base for cable ties, screw-on 38.1x38.1 mm – industrial quality
Cable ties with metal latch closure, heat-stabilised and weather-resistant – industrial quality
Screw base with detent for cable ties with tab
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
truss head screw with H cross recess
Heat-resistant crepe masking tape +120 °C
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
WÜPLAST® pan head screw with flange and hexagon socket WN1451, A2 stainless steel
Self-adhesive fusible layer
Pan Head screw with hexalobular head ISO 14583, A2-70 stainless steel, plain