Flashing warning lamp LED round
LED flashing warning lamp, round
LGHT-HAZARDFLASH-BTRY-108X111MM
Art.-no. 0827559000
EAN 4050641674449
Register now and access more than 20,000 products
Lithium ion long-life battery
Scope of delivery includes:
- 100 - 240 V AC charging adapter
- 12 - 24 V DC charging adapter
- USB cable and magnetic mount
- Art. no. 0827559000 red LEDs
9 different operating modes
Rotating, fast flashing, single flashing, alternate flashing, SOS rescue, bright continuous light, soft continuous light, 2-LED flashing light, 4-LED flashing light
The device must not be tampered with. If the lamp is incorrectly assembled, this can affect its watertightness and damage the device.
Datasheets(X)
Depending on the application, it can be used horizontally, upright or suspended, e.g. on roads, at construction sites or in other areas where emergency signals need to be displayed.
Using the magnet on the back: The LED warning lamp can be attached to metal surfaces. To charge the LED warning lamp, place it on the magnetic mount (observe correct polarity).
Power rating | 2.6 W |
Battery designation | Li-Ion |
Number of rechargeable batteries/batteries | 1 PCS |
Length x width x height | 105 x 35 x 35 mm |
Last viewed
Plastic threaded plug W.TEC® WP 700 cover cap
Twist drill bit HSS DIN 338 TYPE RN
Wire end ferrule without plastic sleeve DIN 46228 Part 1
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Adhesive base ABM112 PA
WÜPLAST® pan head screw with flange and Z Phillips head WN 1411, steel 10.9, zinc-plated, transparent passivated (A3K)
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, A2-070 stainless steel, plain
Hexagonal bolt with thread up to the head DIN 933, zinc plated 8.8 steel with thick-layer passivation (VZD)
Electrical insulating tape
CERALINE Longlife & Speed lamella flap disc