Flat chisel In line with DIN 6453
Flat chisel
HNDCHIS-FL-L175-B22MM
Register now and access more than 20,000 products
Tempered hammer head
Datasheets(X)
 | |
Length | 175 mm |
Cutting edge width (S) | 22 mm |
Striking-surface width | 12 mm |
Striking-surface length | 20 mm |
Last viewed
Screw base with detent for cable ties with tab
Hexagonal bolt with flange DIN 6921, steel 8.8, zinc-plated, blue passivated (A2K)
WÜPLAST® pan head screw with flange and Z Phillips head WN 1411, steel 10.9, zinc-plated, transparent passivated (A3K)
Cable ties with plastic latch, detectable – industrial quality
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
HSCo green-ring machine tap for blind holes DIN 371/376
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Countersunk head screw with hexagon socket, assortment 635 pieces in system case 4.4.1. ISO 10642
Twist drill bit HSS DIN 338 TYPE RN
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain