Flat gasket For flat-sealing screw joints of heating and drinking water pipes
Flat gasket
FLSEAL-DN25
Register now and access more than 20,000 products
DVGW-certified
Simultaneous straining of the gasket with the maximum values for temperature and operating pressure is not possible. The specifications also depend on the medium, so they are therefore only guidelines.
Datasheets(X)
 | |
Material | Aramid fibre |
Colour | Grey |
DN nominal width | DN 25 |
Internal diameter (d1) | 25.0 mm |
Outer diameter (d2) | 38.5 mm |
Thickness (h) | 2.0 mm |
Min. temperature resistance | -50 °C |
Max. temperature resistance | 200 °C |
Max. operating pressure | 40 bar |
Approval mark | DVGW |
Last viewed
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Cylindrical pin, hardened ISO 8734 steel plain, type A hardened, tolerance class m6
Washer with large outside diameter DIN 9021, brass, plain
Protective glove nitrile TIGERFLEX® Plus
TX bit
C 6.3 PH bit (1/4 inch)
Feather key, high profile DIN 6885, A4 stainless steel, plain, shape A
Silicone acetate
GEFU® thread-rolling screw With Taptite 2000® thread, hexagon head with collar and hexalobular drive (TXplus)
90° angled tube cable lug Standard (similar to DIN)