Flat washer - large external diameter DIN EN ISO 7093-1, A2 stainless steel
ISO 7093-1 stainless steel A2 200 HV plain
WSH-ISO7093/1-A2-200HV-10
Register now and access more than 20,000 products
- Washer with large outside diameter
- Hardness min. 200 HV
DIN 9021 has been withdrawn and replaced by international standard DIN EN ISO 7093-1.
Nominal sizes 2.5 and 7 are no longer included in DIN EN ISO 7093-1 and therefore remain valid as DIN 9021.
Datasheets(X)
 | |
Suitable for screw thread | M10 |
Internal diameter (d1) | 10.5 mm |
Outer diameter (d2) | 30 mm |
Thickness (h1) | 2.5 mm |
Standards | ISO 7093-1 |
Material | Stainless steel A2 |
Surface | Plain |
Vickers hardness, HV | 200 HV |
RoHS-compliant | Yes |
Last viewed
Blind rivet, open, with break mandrel and flat head ISO 15979, dome head, steel/steel
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, plain
Ring-shaped crimp cable lug DIN 46234 and similar
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
Plain washers - large series ISO 7093-1 A4 stainless steel 200 HV plain
Twist drill bit HSS DIN 338 type RN 130°
Disc spring for ball bearing
High-performance fastening base for wide-strip cable ties
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain