Foam gun
Foam gun
FMGUN-2,1LTR-1/4IN
Register now and access more than 20,000 products
Uniform foam structure
- Economical
- Effective use of cleaners with long-lasting results and slow-running foam
- Areas to which foam has already been applied are easy to identify
User-friendly
Easy to mount on existing high-pressure cleaners or steam jets using adapters
All parts that come into contact with cleaner are made from stainless steel or plastic
- Corrosion-resistant
- Foam gun is easy to clean
Ideal dispensing of cleaner using the set screw
Rinse the foam gun with water after use.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
For foaming cleaning agents when cleaning bodywork, chassis, attachments, tarpaulins, workshops, service rooms and stalls
Use the appropriate adapter to connect the foam gun to the gun handle on the high-pressure device, and fill the tank with cleaner.
Type description | Foam cleaner |
Included in delivery | Container, adapter 1/4" on union nut for Kärcher high-pressure devices M22, 1/4" on M22 reducing nipple |
Min. operating pressure | 150 bar |
Max. operating pressure | 200 bar |
Coverage distance | 3 m |
Connection thread | 1/4 inch |
Bin capacity | 2.1 l |
Max. water temperature | 80 °C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Twist drill bit HSS DIN 338 type RN 130°
Cable ties with metal latch closure – industrial quality
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, A2-070 stainless steel, plain
Cable ties with plastic latch closure – industrial quality
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Square wedge-shaped washer DIN 6917, 295-350 HV, hot-dip galvanised, wedge-shaped, for high-tensile prestressed bolt on I-profile
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
WÜPLAST® pan head screw with flange and Z Phillips head WN 1411, steel 10.9, zinc-plated, transparent passivated (A3K)
Cylindrical pin, hardened ISO 8734 steel plain, type A hardened, tolerance class m6