Freezer spray

Name: Freezer spray
Brand: Würth
SKU: 0890001200

Freezer spray
FREZSPR-200ML

Art.-no. 0890001200

EAN 4056807125923

All versions

Individual price display after login

Freezer spray

Art.-no. 0890001200

Individual price display after login

Quantity

x 12 pcs

Exclusively for trade customers

Login/Register
Call customer service: +603-8021 0200

For universal use in repair and assembly work and for troubleshooting

Non-flammable!

Can be used in low-voltage areas meeting VDE 0100 (voltage range: <50 V (AC), <120 V (DC)) even while energised.

Powerful cooling effect

Spray produces localised cooling down to -50 °C

Ball bearings, bushings, shafts etc. can easily be inserted in the tightest fits

Creates an intended thermal overload, so that faults in electrical circuits can be quickly identified.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

For cooling transistors, resistors and engine parts in the automotive sector, e.g. carburettor and injection systems to check that cold-starting devices are functional. For preventing heat damage in the area around the sites of soldering operations.

Instructions

Spray directly onto the area to be treated from a distance of 2 to 8 cm.

Contents	200 ml
Colour	Colourless
Shelf life from production	24 Month
Density	1.18 g/cm³
Density conditions	at 20°C

Suitable glove:

Product

Description

Chemical cut protection glove W-310 Level D

Description:

Permeation level: 2

Very robust, liquid-proof protective glove that combines optimal cut protection with chemical protection

Vinyl chemical and moisture protective glove

Description:

Permeation level: 4

Fully dipped protective glove with vinyl coating on cotton jersey lining

Chemical protective glove, Butyl

Description:

Permeation level: 5

Gas-tight and resistant to exhaust gases produced by combustion processes

Nitrile chemical protective glove with cotton velour finish inside

Description:

Permeation level: 2

Nitrile chemical protective glove long, heavy-duty design

Description:

Permeation level: 3

Chemical protective glove chloroprene

Description:

Permeation level: 1

Heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.