GEFU® thread-rolling screw With flat head and hexalobular drive (Txplus), serrated
GEFU DIN 7500-1 steel zinc plated flat head TXP
SCR-PANHD-UKV-TXP20-(A2K)-M4,0X9
Register now and access more than 20,000 products
For a secure connection in thin sheet metal (up to approx. 520 N/mm²):
- Thread-cutting zone for forming rim holes
- Special round under-head geometry for high tightening and overturning torques
- Play-free and self-locking thread seating => Reduced likelihood of screw working loose => Protection against loss
- Toothing under the head for increased breakaway torque
The suitability of the GEFU for the application or component in question must be determined by preliminary testing!
1. Apply
2. Thread tapping and creation of eyelet in sheet metal
3. Tighten
| Pre-hole diameter recommendations: | |||
| Nominal diameter | Sheet thickness mm | Pre-hole diameter mm | Tightening torque Nm |
| M4 | 0,5 | 2,6 | 2 |
| 0,6 | 2,9 | 2,7 | |
| 0,85 | 3,1 | 3,2 | |
| All specifications are determined empirically for sheets made of material St12 (tensile strength approx. 350 N/mm²) | |||
Datasheets(X)
For a secure connection in thin sheet metal (up to approx. 520 N/mm²)
 | |
Thread type x nominal diameter (d1) | M4 |
Length (l1) | 9 mm |
Head diameter (dk) | 8 mm |
Head height (k1) | 3.1 mm |
Head type | Flat head |
Material | Steel, case-hardened |
Surface | Zinc plated |
Thread type | Metric thread |
Internal drive | TXP20 |
Standards | DIN 7500-1 |
RoHS-compliant | Yes |
Locking device operating principle | Serration |
Locking function | Locking against self-loosening by mechanical interlocking |
Last viewed
Cable ties with metal latch closure, heat-stabilised and weather-resistant – industrial quality
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, A2 stainless steel
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Sheet metal nut, type 1
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Eye bolt DIN 444, steel 4.6, zinc-plated, blue passivated (A2K), shape B
Twist Drill bit HSCO ASME B94.11M TYPE RN
Cable ties with metal latch closure – industrial quality
Twist Drill bit assortment ANSI HSS
Hexagonal bolt, fully threaded, SB fittings, DIN EN 15048-1