HHS<SUP>®</SUP> foodsafe adhesive lubricant - LUB-FDSAVE-(FDGRD-HHS)-500ML

HHS^® foodsafe adhesive lubricant

Name: HHS ® foodsafe adhesive lubricant
Brand: Würth
SKU: 08931076

Foodsafe adhesive lubricant HHS NSF
LUB-FDSAVE-(FDGRD-HHS)-500ML

Art.-no. 08931076

EAN 4065233124059

All versions

Individual price display after login

HHS^® foodsafe adhesive lubricant

Art.-no. 08931076

Individual price display after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: +603-8021 0200

Waterproof, synthetic adhesive lubricant with creeping properties

Can be used in areas in which food is processed or stored

NSF H1-registered. The product can come into contact with foodstuffs for technical reasons.

Excellent creep properties

Lubricates hard-to-reach areas

Penetrates very tight spaces and tolerances

Good adhesive properties

Wide range of applications, e.g. on vertical lubricating points

Resistant to centrifugal forces on turning and rotating parts

Provides long-lasting protection against corrosion and damage to non-ferrous metals

Water-resistant

Resin- and acid-free

Silicone-, acid-, resin- and AOX-free

NoticeIf used in areas in which food is processed or stored, only the minimum quantity technically required should be used. When using as a corrosion protection film for food contact surfaces, completely remove all lubricant before re-starting the appliance.

NSF H1-registered (no.: 140816), meets the requirements of H1, 1998.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications as well as storage and usage conditions, we do not assume any liability for a specific application result. Any technical information or advice provided by our free customer service shall be provided to the exclusion of any liability, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting wilfully. We ensure the consistent quality of our products. We reserve the right to make technical changes and further developments to our products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application areaWaterproof, synthetic adhesive lubricant with creeping properties for use in food-related applications.

InstructionsShake can well before use. Thoroughly clean the lubricating point and then apply where required. If used in areas in which food is processed or stored, only the minimum quantity technically required should be used. When using as a corrosion protection film for food contact surfaces, completely remove all lubricant before re-starting the appliance

Chemical basis	Synthetic oil with a multifunction additive combination
Colour	Colourless
Smell/fragrance	Characteristic
Density	0.8 g/cm³
Density conditions	at 20°C
Min. temperature conditions	-25 °C
Max. temperature conditions	180 °C
Min. flashing point	200 °C
Kinematic oil basis viscosity	1251 mm²/s
Conditions for viscosity of oil basis	after evaporation of solvent at 40°C
Silicone-free	Yes
Acid-free	Yes
Resin-free	Yes
AOX-free	Yes
Resistance against	Water
Contents	500 ml
Container	Aerosol can
Shelf life from production	24 Month

Suitable glove:

Product

Description

Vinyl chemical and moisture protective glove

Description:

Permeation level: 3

Fully dipped protective glove with vinyl coating on cotton jersey lining

Chemical protective glove, Butyl

Description:

Permeation level: 2

Gas-tight and resistant to exhaust gases produced by combustion processes

Nitrile chemical protective glove with cotton velour finish inside

Description:

Permeation level: 5

Nitrile chemical protective glove long, heavy-duty design

Description:

Permeation level: 6

Disposable nitrile glove

Description:

Permeation level: 2

Liquid-proof, food-safe disposable glove

Disposable nitrile grip glove

Description:

Permeation level: 2

Unique, diamond texture for optimal grip

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.