Helical insert W.TEC® INSERT COIL Screw Grip
Wire thread insert SG A2 W.TEC series
HELCINRT-SG-A2-M36X54
W.TEC
Register now and access more than 20,000 products
Perfect combination of space-spacing and wear-resistant thread strength
- In low-strength metal materials
- In plastics
Optimal force distribution
Flexibility of the thread inserts compensates for pitch and angle errors
Thread insert sits securely
Minimised thread friction torque and minimised torsional stress
Increased corrosion resistance
Space and weight minimisation
Smaller number of required connection points and/or reduced screwing dimensions
Costs minimised
By reinforcing the thread, which effectively minimises the repair costs
Integrated loss protection
The clamping torques are comparable with the values of DIN 267 Part 15 or DIN EN ISO 2320.
The clamping torques are comparable with the values of DIN 267 Part 15 or DIN EN ISO 2320.
Datasheets(X)
CAD data (available after login)
A resistant thread in 4 steps:
Step 1:
Drill a core hole or drill out the damaged thread
Step 2:
Create a receiving thread
- By cutting using screw tap
OR
- Without cutting using thread moulding for an even more resilient receiving thread
Step 3:
Set the thread insert
- The helical insert can be mounted both mechanically and also by hand using the corresponding screw-in tool.
Step 4:
Break the pin
- Separate the follower pin by tapping gently on the predetermined break point with a pin breaker, and then remove. Automatic pin breakers are also available for series production.
 | |
Material | Stainless steel A2 |
Surface | Plain |
Design | With loss-preventing retainer |
Thread type x nominal diameter | M36 |
Length built-in state (l1) | 54 mm |
Outer diameter (d1) | 41.8 mm |
Thread form | Standard metric thread |
Pitch | 4 mm |
Core hole diameter | 37 mm |
Min. core hole depth | 72 mm |
Required thread depth at stud hole | 68 mm |
Locking device operating principle | Clamping by thread geometry |
Locking function | Locking against loosening by clamping |
Last viewed
Wire end ferrule without plastic sleeve DIN 46228 Part 1
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Cylinder saw, HSS bimetal Longlife & Speed HSCo8
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Machine tap For W.TEC® INSERT COIL helical inserts - made of HSCo; shape B
Flat connector contact Junior Power Timer (JPT) 2.8
Countersunk head screw with hexagon socket ISO 10642, A4-070 stainless steel, plain
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Swivel brackets1
Tap wrench DIN 1814 Performance, adjustable