Hexagon nut DIN 934, plain I12I steel
DIN 934 steel I12I plain
NUT-HEX-DIN934-I12I-WS30-M20
Register now and access more than 20,000 products
Hexagonal nuts complying with DIN 934 cannot support test loads as per DIN EN ISO 898-2.
- The strength class designation has two vertical bars added before and after the strength code to differentiate.
DIN 934 has been withdrawn and replaced by ISO 4032/8673. There is no similarity (nominal Ø changed | Some nut heights changed | Width across flats changed for M10, M12, M14, M22 | ISO 4032 for standard thread | ISO 8673 for fine thread).
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M20 |
Height (m1) | 16 mm |
External drive (s1) | WS30 |
Standards | DIN 934 |
Material | Steel |
Property class | I12I |
Surface | Plain |
RoHS-compliant | Yes |
Last viewed
Adhesive base for cable ties, screw-on 38.1x38.1 mm – industrial quality
Twist drill bit HSS DIN 338 TYPE RN
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Pan head screw with H cross recess DIN 7985, A2 stainless steel, plain
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
WÜPLAST® pan head screw with hexalobular drive WN 1452, steel 10.9, zinc-plated, transparent passivated (A3K)
Screw-on flame-retardant base for cable ties, 25.4x25.4 mm - industrial quality
Pan head screw, imperial ASME B18.6.3, plain 18-8 stainless steel, H cross recess, UNC (comparable with ISO metric thread)
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
3/8-inch socket wrench for TX screws, short