Hexagon nut, inch ASME B18.2.2, blue passivated zinc plated GR2 steel, UNF (fine thread)
ASME B18.2.2 steel GR2 zinc plated UNF
NUT-HX-FIN-GR2-(ZN)-5/16_24
Register now and access more than 20,000 products
1 INCH (in) = 25.4 mm
Mechanical properties are regulated in SAE J995
Standard thread tolerance according to ASME B1.1 = 2B (for internal thread)
Datasheets(X)
 | |
Nominal diameter in inches (D) | 5/16 in |
Height (m1) | 1.125 in |
Width across flats (s1) | 1/2 inch |
Material | Steel |
Property class | GR2 |
Surface | Zinc plated |
Thread type | UNF |
Number of thread starts per inch | 24 |
Last viewed
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Screw with flattened half round head and hexagon socket ISO 7380-1 steel 010.9, zinc-plated blue passivated (A2K)
C 6.3 PZ bit (1/4 inch) Hexagon drive
Hexagon Socket Head Cap Screw with low Head DIN 7984, A2-070 stainless steel, plain
Twist drill bit HSS DIN 338 TYPE RN
Hexagon socket set screw with ring cutter ISO 4029, steel 45H, zinc-plated, blue passivated (A2K)
Hexagon socket set screw with ring cutter ISO 4029, steel 45H, zinc-plated, blue passivated (A2K)
Hexagon socket set screw with ring cutter ISO 4029, steel 45H, zinc-plated, blue passivated (A2K)
Cable tie BT PA
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly