Hexagon nut, inch ASME B18.2.2, plain GR8 steel, UNC (comparable with ISO metric thread)
ASME B18.2.2 steel GR8 plain UNC
NUT-HEX-FIN-GR8-(PL)-1/2_13
Register now and access more than 20,000 products
1 INCH (in) = 25.4 mm
Mechanical properties are regulated in SAE J995
Standard thread tolerance according to ASME B1.1 = 2B (for internal thread)
Datasheets(X)
 | |
Nominal diameter in inches (D) | 1/2 in |
Height (m1) | 0.448 in |
Width across flats (s1) | 3/4 inch |
Material | Steel |
Property class | GR8 |
Surface | Plain |
Thread type | UNC |
Number of thread starts per inch | 13 |
Last viewed
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Pin punch in accordance with DIN 6450 form C with hardened impact head
VARIFIX® wing nut, profile 41 For assembly connection of all VARIFIX® C-mounting rails in the 41 range
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Double box-end wrench
Welded stud ISO 13918, plain A2 stainless steel
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, ≤ M24 A2-70 stainless steel, ≥ M24 A2-50 stainless steel
Single wire seal (SEAL) For uninsulated cable connector
System stacking cabinet For ORSY® system case 8.4.2
PLT-300 PA cable tie with plastic latch, UV/heat stabilised, 115 °C, INDUSTRY