Hexagon nut, inch
ASME B18.2.2 steel GR2 zinc plated UNF
NUT-HX-FIN-GR2-(ZN)-1/2_20
Register now and access more than 20,000 products
1 INCH (in) = 25.4 mm
Mechanical properties are regulated in SAE J995
Standard thread tolerance according to ASME B1.1 = 2B (for internal thread)
Datasheets(X)
 | |
Nominal diameter in inches (D) | 1/2 in |
Height (m1) | 0.448 in |
Width across flats (s1) | 3/4 inch |
Material | Steel |
Property class | GR2 |
Surface | Zinc plated |
Thread type | UNF |
Number of thread starts per inch | 20 |
Other standard | 0 - not applicable |
Last viewed
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Thread mandrel
Thread mandrel
Knife blade, straight, toothed
Chuck with lock nut
Flat washers assortment
Lock washer S Spring steel with mechanically applied zinc coating (≤ dia. 3.5 zinc-plated, blue passivated)
Jigsaw blade, construction, one star For sandwich material and thin sheet metal
1/2" socket wrench insert metric, bi-hex, short
Dovetail milling cutter for wood With chink cutter