Hexagon nut, inch
ASME B18.2.2 steel zinc plated UNF
NUT-HX-MS-GR2-WS11/32-(ZN)-8_36
Register now and access more than 20,000 products
1 INCH (in) = 25.4 mm
Standard thread tolerance according to ASME B1.1 = 2B (for internal thread)
Datasheets(X)
 | |
Material | Steel |
Property class | GR2 |
Surface | Zinc plated |
Nominal diameter (D) | 0.1631 in |
Number of thread starts per inch | 36 |
Thread type | UNF |
Height (m1) | 0.117 in |
Width across flats (s1) | 11/32 inch |
Last viewed
Pipe cable lug with inspection hole
Cable grommet CR
Twist drill bit HSS DIN 338 TYPE RN
Compressed-air filter / Regulator Semi-automatic
Screw-on fastening base
Cylinder saw, HSS bimetal Longlife & Speed HSCo8
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Machinist's hammer German design in accordance with DIN 1041
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 8.8, zinc-plated, blue passivated (A2K)