Hexagon nut, low profile with fine thread
ISO 8675 steel 8 zn ptd. thick-layer pass. fthr.
NUT-HEX-ISO8675-8-WS18-(ZSML)-M12X1,5
Register now and access more than 20,000 products
Connection elements with galvanised chrome (VI)-free thick-film passivation (ZSML) offer a future-proof alternative compared to surfaces containing chrome (VI). The coating consists of a zinc layer with passivation on a (chrome III) basis and sealing coat (top coat with integrated lubricating particles).
Overview of advantages:
- Higher quality replacement of common galvanised coatings such as A2C or A3C
- Adjusted friction coefficient range from 0.09 μ – 0.14 μ due to top coat with integrated lubricating particles
- Thermal capacity up to 120 °C
- Even layer distribution
- Functional and decorative
ISO 8675 replaces DIN 439 with fine thread | There is some similarity | Strength class for stainless steels changed from 50 to 025 and from 70 to 035 | Width across flats changed for M10, M12, M14, M22 | Nominal Ø M1.8 removed | Standard thread has been included in ISO 4035 | ISO 8675 only contains fine thread.
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (D) | M12 x 1.5 |
Height (m1) | 6 mm |
External drive (s1) | WS18 |
Standards | ISO 8675 |
Material | Steel |
Property class | 8 |
Hardness category | 0 - not applicable |
Surface | Zinc plated thick-layer passivation |
RoHS-compliant | Yes |
Last viewed
Screw connection seal
Pipe cutter for stainless steel corrugated pipes
VDE side cutters, DIN ISO 5749 IEC 60900
Electronic solder no. 1
Reversible tip For groove cutters
Countersunk screw with hexagon socket, galvanised ISO 10642, steel 10.9, zinc-plated, blue passivated (A2K)
W-KLT 2.0 small container S
Metric double box-end wrench with POWERDRIV®
Solder cable lug DIN 46211
Precision crepe tape