Hexagonal bolt ASME B18.2.1, blue passivated zinc plated GR5 steel (A2K)
ASME B18.2.1 steel GR5 zinc plated UNC
SCR-HCS-GR5-(ZN)-5/16_18X3
Register now and access more than 20,000 products
The mechanical properties are regulated in SAE J429
The thread length is based on the standard ASME B18.2.1
1 INCH (in) = 25.4 mm
Datasheets(X)
 | |
Nominal diameter (d1) | 5/16 in |
Length (l1) | 3 in |
Thread type | UNC |
Head height (k1) | 0.203 in |
External drive (s1) | WS1/2 |
Material | Steel |
Property class | GR5 |
Surface | Zinc plated |
Width across flats | 1/2 inch |
Last viewed
Flat washer with chamfer DIN EN ISO 7090, steel, hot-dip galvanised (hdg), hardness class 200 HV
Cable ties with plastic latch closure - industrial quality
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Set screw hex socket and ring cutter IN
Single wire seal (SEAL) For uninsulated cable connector
Countersunk head screw with hexagon socket ISO 10642, A4-070 stainless steel, plain
Heat-resistant crepe masking tape +120 °C
Flat washer ASME B18.21.1, plain 316 stainless steel
Pipe cable lug with inspection hole
Cable ties with metal latch closure – industrial quality