Hexagonal nut, low profile with clamping piece (non-metal insert), imperial
ASME B18.16.6 GR2 zc-plt steel UNF
NUT-HX-NYL-INS-NTM-N2-(ZN)-10_32
Register now and access more than 20,000 products
1 INCH (in) = 25.4 mm
The mechanical properties are set out in ASME B18.16.6
Standard thread tolerance as per ASME B1.1 = 2B (for female threads)
Datasheets(X)
 | |
Nominal diameter | 0.1890 in |
Material | Steel |
Property class | GRA |
Surface | Zinc plated |
ASME | 0 - not applicable |
Thread type | UNF |
Number of thread starts per inch | 32 |
Last viewed
Machine tap For W.TEC® INSERT COIL helical inserts - made of HSCo; shape B
WÜPLAST® pan head screw with Z Phillips head WN 1412, steel 10.9, zinc-plated, transparent passivated (A3K)
Compression cable lug DIN 46235
Adhesive base for cable ties, screw-on 38.1x38.1 mm – industrial quality
Heat-shrink crimp connector spade terminal
Sealing ring, vulcanised fibre, shape A
Single wire seal (SEAL) For uninsulated cable connector
Cable ties with metal latch closure – industrial quality
Screw base with detent for cable ties with tab
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)