Holder for bolt fixing
Stud mount
STUDMNT-CBLTIE-BLCK-M16-(2,3-8,9MM)
Register now and access more than 20,000 products
- Mounting on holders such as screws, blind rivet bolts and welded studs
- Suitable for a variety of common bolt sizes and cable connectors
- Wide range of positioning configurations for flexible use
- Screw holders for faster installation than with metal clips
- Suitable for use under the most difficult conditions thanks to the weather-resistant material polyamide 6.6
- Maintains a distance from the longitudinal frame member to prevent abrasion on the bundle during operation
- Insensitive to vibrations
- Secures bundles with cable connectors – up to four separate bundles per installation
- Remains on the vehicle during maintenance or repair – the bundle is reattached with new cable connectors
- UV-resistant and weather-resistant
Datasheets(X)
- Management of cables and hoses along the longitudinal frame members
- Mounting a bundle under the chassis unit
- Management of cable harnesses in cab, sleeping cabin and trailer
- Making use of unused screw pillars already available in the vehicle
- Maintaining a distance from the frame to avoid abrasion
- Brackets are designed to utilise existing vehicle screw mounts for attaching cable ties to bolts.
- These simple cabling accessories can be installed using a slight tap from a hammer, by screwing on the bracket or with the special installation tool.
- These fixtures can be used for a variety of cable ties.
Suitable for cable ties | 2.3 - 8.9 mm |
Width (a) | 24.4 mm |
Diameter of hole (c) | 16.0 mm |
Length (d) | 50.6 mm |
Height (h) | 27.9 mm |
Material | PA 6.6 - Polyamide |
Halogen-free | Yes |
Silicone-free | Yes |
Colour | Black |
Last viewed
Blind rivet, open, with break mandrel and flat head ISO 15981, dome head, aluminium/aluminium
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Crimping tool with parallel loading
Blind rivet, open, with break mandrel and flat head ISO 15979, dome head, steel/steel
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Twist drill bit HSS DIN 338 TYPE RN
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, A2 stainless steel
Adhesive-free plaster, blue, elastic, latex-free For all wounds and cuts